Camouflage Dye Job from Max McCool

camofinal1


Max McCool is Lacrosse Playground’s resident stick stringing and head dyeing expert. This week he shows off a recent black and grey camouflage dye job. Max provided Lacrosse Playground readers with a step-by-step tutorial below:

The basics: This camouflage dye job is pretty easy to pull off if you have a glue gun. It doesn't even take all that long. All you need are two to three colors and the hot glue gun.

Step 1: Start by thinking about which colors you want to use. I used white, light grey, dark grey, and black. When the head is still white, put dots or odd shaped spots of glue around the head. Try not to make lines, keep it to blob-type shapes. Also try not to touch the head with the tip of the glue gun. This will make your glue much harder to take off when you're done.


Camo1



Step 2: Next bring your water to a boil, and add your first and lightest color. I used RIT Pearl Grey and Black. I concocted the grey and placed my head gently in the dye, leaving it in ONLY for about 3-5 minutes. I kept the shade of grey really light, and then took it out and dried it.


camo2

Tips: Don't pour out your water if you're doing it exactly like mine. Also, don't touch it too quickly where the glue is or it will smear.

Step 3: Next, I put more dots of hot glue around the head. I even picked off some of the glue that was already on the stick and tried to re-cover it with a different shape so that the grey and the white blotches would touch and make different shapes. Again, put your dots everywhere.

Step 4: Next is a pretty hard step. Take the grey dye that you had and do what you have to do to get it boiling again. You're going to reheat the same color, and then stir it and put in back in the bucket ready for the next shade. This time, I dipped the head in and checked it every two minutes until I had a nice deep shade of grey. It probably took eight to ten minutes, but checking it is how to get the color you want. You can do this same thing with blue, green, yellow, and red (though that may look pink). Longer times make darker colors.


camo3



Step 5: When you pull it out of the dye again, repeat the process of drying it and adding more hot glue. After this step your head should be 75 percent covered in random hot glue.

Step 6: Lastly, boil up your black dye. Get the water AS HOT as possible, and pour it in your bucket. Drop your head in there and leave it. There is no point in checking it, because the longer you leave it (and the hotter the water is) the darker it will get. I usually wait at least 20 minutes because impatience with black leads to purple, and no one wants that.


camo4



Step 7: After you take it out, rinse your head off and try to dry it with a paper towel. Let it sit and cool for about 5 minutes, then place it in the freezer for 30 minutes. This helps the dye set into the plastic. It also makes the hot glue brittle. If you didn't touch the hot glue gun to the head when you were applying it, the glue should pop right off. Use your fingernails or a butterknife and pop it all off. If it starts to get soft, toss it right back in the ice box and harden it back up. When you're done you'll have a four-color camo stick! If you give it a try, be sure to take pictures and post them to the photo section of Lacrosse Playground! Here are some shots of the final product:



camofinal1
Click to see larger version

camofinalclose1

camofinalclose2



A note to readers: Check back with Lacrosse Playground soon, as Max will debut one of his sickest dye jobs ever.
Back to blog

14 comments

Do you know how to do a tie-dye pattern on a head?

Gianna

Could you do green, light brown and brown with this same technique?

jim

This camo sucks. ~<===3

Bob

Wow! Bob your such a fag. Get a life!

laxman29

This camo is sweet. I have this camo but woodland on the new bamboo shaft.

laxman29

Leave a comment

Please note, comments need to be approved before they are published.